10605 StarTec Long Life Portable 3 in 1 heat tool. Melt cut & Solder. 4

StarTec

Availability: In Stock Out Of Stock
Code: STA10605

£32.99 £0.00
Earn 0 Rewards Points


3IN1 MULTITOOL 4AA Foam Cutter / Soldering Iron / Pyrography Iron in a single device. Now you can mould and shape polystyrene, quickly and easily solder or etch wood without checking where the nearest plug is! The Multi Heat tool is powered by 4 AA Batteries to cut out the need for mains power and, expensive and heavy transformers. Yet the batteries will give a long lasting heat! The 4 AA battery version gives higher heat temperatures than the smaller 2AA Battery version, plus slightly longer operating times. Plug and Start System: Simply swap the tip of the main unit and you are good to go! Handy and easy to use. Deployable in many situations thanks to the ability to swap tools so quickly. The foam and polystyrene cutter tool comes with an easily replaceable cutting wire. (Spares available separately). A warning LED tells you when the tool is operating. Obviously care should be taken as this is a heat tool and touching the tips while in use or immediately after can result in burns. Technical Data: ̢???? Foam cutter: Max. cutting width 60mm / Max. cutting depth 210mm ̢???? Four Duracell AA batteries or similar required - not included. ̢???? Min. temperature 300 ???C ̢???? Max. temperature 500 ???C ̢???? Heat-up time 2 - 6 secs Contents: ̢???? MULTI TOOL ST 103 Main unit 3in1 4AA version ̢???? ST 106 Soldering tip ̢???? ST 106 Pyrography tip ̢???? ST 106 Foam cutter tip ̢???? 3 pcs cutting wire ST 103 ̢???? Manual Typical battery life: Cutting foam: 90 minutes Soldering 80 minutes Etching Wood: 30 minutes

The item has been added to your basket

Continue Shopping
Proceed To Checkout

This website is Copyright © 2018 Golden Valley Hobbies Limited. All Rights Reserved.

  • Paypal
  • Mastercard
  • Visa
  • JCB
  • Maestro
  • Payment gateway