Golden Valley Hobbies GVSCO12 Track Screws O Gauge 12mm Long (x100)

Track screws designed to be used on model railways and specifically flexible track.

Better hold than nails and pins.

Allows easy removal without damaging the track.

Easier and safer to fit than pins as they do not require a hammer.

Can also be used to fit Hornby surface mounted point motors.

Characteristics:

12mm long (1/2in): enough to go through the sleepers and standard underlay.

Self tapping: will create their own thread into the wood.

No pre-drilling required unless screwing into hard wood.

Blackened: will not show in the middle of sleepers.

Size: Recommended for O gauge track.

Each bag contains approximately 100 screws: this is enough for more than 16 yards of track if using 6 screws per length.

Recommended to be used with Golden Valley Hobbies screwdriver part number GVDRIVER.

Do not overtightened as to not damage the track.

Please note: this item is packed by weight so quantity may vary slightly.